описание продукции
The steering knuckle is the hinge for turning the wheels, and is generally fork-shaped. The upper and lower forks have two coaxial holes for installing the kingpin, and the steering knuckle journal is used to install the wheel. The two lugs of the pin hole on the steering knuckle are connected with the fist-shaped parts at both ends of the front axle through the king pin, so that the front wheel can deflect a certain angle around the king pin to turn the car. In order to reduce wear, a bronze bushing is pressed into the steering knuckle pin hole, and the bushing is lubricated by the grease nipple installed on the new steering knuckle. The steering drive shaft is widely used in automobiles. In cars with front-engine rear wheels or all-wheel drive, due to the deformation of the elastic suspension, the relative positions of the transmission or transfer output shaft and the drive axle input shaft often change, so the cross-shaft steering drive shaft is generally used. In the steering drive axle, the angle between the inner and outer half shafts changes with the driving needs, and the constant speed steering drive shaft is often used at this time. When the rear drive axle is an independent suspension, the steering drive shaft must also be used.
изготовитель оригинального оборудования: 95934239 95934240
№ LZSK: LZ - TY328
машинаустройство: для модели: Вьекес
год выпуска: 2013 - 2016
тип: поворотный кулак
гарантийный срок: 3 года, 3 года / 50000 км
место происхождения: чжэцзян, китай
размер: стандартный OEM
тип автомобиля: Вьекес
автомобильные производители: универсальный автомобиль
упаковка: картонные ящики / лоток
сертификат: ISO16949 / IATF1699
изготовитель: Федеральный Райан
упаковка детали: нейтральная упаковка: внутри пластиковый пакет, внутренняя коробка, бумажная коробка, поднос.
предварительный период: